Dead weight Testers

  Pressure calibration is basically used for comparing the output of a device that will be used to measure the pressure with another pressure measurement device or pressure standards. The pneumatic calibrators   need to be more accurate when compared to the calibrating device, it should be 4 times more accurate than the calibrating device. They also have the capability to measure the device under test (DUT) output. The device under test is used as a standard device to generate a common pressure in the measurement circuit. The outputs are compared with one another from the lowest to the highest reading of the device under tests full-scale range or we can also use the range for which it is normally used.     The comparison process will be performed from the highest level of fundamental pressure to every day pressure measurement devices that will ensure pressure measurements are accurate and are accepted according to the standards. Pressure calibrators are used for dif...

Nagman had developed & introduced several Innovative products including Handheld Dry Block Calibrators, Advanced Microprocessor/Micro-Controller based Temperature Calibrators, Multi-hole Very High-Temperature Dry Block Calibrators, etc. Our range of Signal Calibrators  has always been the most efficient Calibrator suppliers in the industry. We have wide types of Calibrators in different versions.   Thermocouple Calibrator -NAGMAN 02+ has the capability to measure and simulate voltage and thermocouple readings. We are providing them with a special offer price of $250. RTD Calibrator – NAGMAN 03+ also has the same feature as NAGMAN 02+ but it provides measurement and simulation of resistance, RTD types(Cu10, Cu50, Pt100, Pt200, Pt500, Pt1000). The offer price for RTD Calibrator is $250. Process Meter- NAGMAN 05+ is an updated version of signal calibrators and it has the capability to measure and simulate current readings and it also provides a loop supply(24V) for Tran...